Atop ABLELink SW5002 Manuel d'utilisateur télécharger pdf (Page 16)

User manual Version 1.0

SW5002 Wireless Serial Server

- 10 -

Configuring SW5002 to Tunneling Mode

Using one of three configuration methods (Telnet, Web, or Console), user can configure SW5002 to TCP

Server mode with a desired IP address and port, and with other SW5002 is configured as TCP Clients

mode with Server IP and port as destination IP and port respectively.

 Note: TCP client has to assign the destination IP and the destination port corresponding to TCP

server’s IP and listening port (example: TCP 4660 port).

Fig 9. TCP Tunneling Mode

UDP

In UDP mode, User may exchange Multicast data from one SW5002 with multiple SW5002s, Vice

versa is also true.

Fig 10. UDP Link in Tunneling mode

Configure SW5002 in UDP Mode

Use one of the three configuration methods (Telnet, Web, and console). User can configure SW5002

to UDP mode. In UDP mode, SW5002 can be configured to communicate to more than one node

(Multicasting). Note that the Multicast IP address is limited by the Class of IP address and subnet

mask. As an example, for a network of Class C of subnet 192.168.1.X and a subnet mask of

255.255.255.0, the maximum Multicast IP address to be configured is four destinations IP’s.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 68 69

Pas de commentaire

Atop ABLELink SW5002 Manuel d'utilisateur Page 16