Atop ABLELink MB5000 Series Manuel d'utilisateur télécharger pdf (Page 12)

User manual Version 1.1

ABLELink

Ethernet Serial Server SE5002

- 11 -

Fig. 6. Configuring the static IP with monitor.exe utility

Fig. 7. Static IP dialog window

A DHCP server can automatically assign the IP address and all the network settings, and SE5002 supports

the DHCP client functions. By default, the DHCP client function on SE5002 is disabled; one may activate the

DHCP client functions by the following steps：

 Execute Monitor.exe(Fig. 6)

 Click on the IP address (of SE5002)

 Click “Config” to pop-up the static IP Dialog Window (Fig. 7)

 Check ”Auto IP” (Fig. 8)

 Click “ Config Now” (The SE5002 will restart and obtain the IP from the DHCP server automatically)

Fig. 8. Monitor.exe Auto IP Dialog Window

3.2 Configuration by Telnet utility:

One may also use Telnet utility to change configuration settings.

 Open Ms-DOS command prompt window

 Enter in the “Telnet IP_address 23 ”.( For example, Telnet 10.0.50.100 23). The system then prompts

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Pas de commentaire

Atop ABLELink MB5000 Series Manuel d'utilisateur Page 12