Atop ABLELink MB5000 Series Manuel d'utilisateur télécharger pdf (Page 60)

User manual Version 1.0

ABLELink

SW5001 Wireless Serial Server

Configuration Utility

The configuration utility is the main utility program used to display and to configure SW’s settings.

D.5 Run the utility

Start the program under environment and the following window shall appear.

D.6 Detecting Operational Devices

Follow steps below to detect all devices currently available on the network.

1. Start monitorXX.exe utility program.

2. Select an item from the Broadcast IP list.

3. Specify a number on Wishes box.

4. Click on the Invite button. This will display all the devices requested.

D.7 Configuring Devices

Use monitor.exe to configure the settings of devices on the network. To do so, please follow the steps

below.

1. Repeat the steps in D.2 to bring up devices information.

2. Select the device to be configured from IP Address, Click on the “Config” button, a configuration

dialog box will popup as shown in Figure D2:

1 2 ... 55 56 57 58 59 60 61 62

Pas de commentaire

Atop ABLELink MB5000 Series Manuel d'utilisateur Page 60